⎝⎛森林舞会游戏⎞⎠

Welcome to the official website of Shanghai Jichuan Machinery Technology Co., Ltd.

Recommended Products

support hotline:

021-59517550

[email protected] Email: [email protected]

021-59517007 Fax: 021-59517007

021-59517009 After sales: 021-59517009

苏州市吴中区东山镇凤凰山路1号光硕科技园5号厂房 Address: No. 5 Guangshuo Science and Technology Park, No. 1 Fenghuangshan Road, Dongshan Town, Wuzhong District, Suzhou City

[ Solution ] Solution for Honeycomb Abrasive Pneumatic Recovery Sandblasting Room of Yoshikawa Sandblasting Machine [2015-12-15 15:20:04]
Working principle of pneumatic sand return: L6W5H3.5 (m) is composed of countless Xiao funnels arranged under the grille. The air flow with negative pressure automatically transports the abrasive back to the sand blasting machine from the bottom of the small funnel. In the cycle. Honeycomb type abrasive pneumatic sandblasting
[ Solution ] The rust removal solution of Yoshikawa sand blasting machine [2015-04-15 11:02:35]
Jichuan Machinery will briefly explain what is sand blasting and rust removal. Sand blasting is a method of using compressed air to spray sand with a certain particle size on the rusted surface of the part through a spray gun to achieve the effect of rust removal. The sand blasting method has the following 4 points:
[ Solution ] High-end solution for the surface treatment of automotive parts [2015-04-10 16:03:39]
Automotive industry design engineers have generally used shot peening to increase the service life of transmission components. Generally, parts are shot peened after heat treatment. For some key parts, such as ring gears and planetary gears, strengthening is the last step in production.
[ Solution ] Three high-end solutions for the surface treatment of automotive parts [2015-04-10 16:02:20]
Regardless of the process parameters, the goal is to achieve a constant and repeatable strengthening strength. Therefore, it is necessary to understand which key variables will affect the final strengthening results during the process, including: Centrifugal shot peening head
[ Solution ] High-end solution 2 for surface treatment of automotive parts [2015-04-10 15:45:55]
In the case of gears, the maximum shear stress occurs at the fillet radii of the tooth root and the gear transition zone. Both tooth surfaces, the driving surface and the driven surface, are subjected to increasing loads. Therefore, the focus of gear strengthening is to strengthen the following parts: driving surface l driven surface
[ Solution ] The solution for sandblasting of Xiaomi Power Supply Shell by Yoshikawa Sandblasting Machine [2015-04-10 15:28:11]
Xiaomi's power supply has been well received by consumers, and its sales volume is also considerable. The power supply case uses a solid aluminum alloy integrated body design, and the side of the fuselage uses a sandblasting process. The entire mobile power supply looks clean, beautiful and delicate. Appearance of sandblasting process
[ Solution ] Talking about the sand blasting machine's solution [2015-04-10 15:15:06]
Common reasons and solutions for the sand blasting machine does not produce sand. Reason one: Too much sand is added, which causes blockage and cannot be pressurized. Solution: The amount of sand added should be appropriate, not too much. Cause two: The spray gun is blocked. Solution: After stopping the air, remove the nozzle and see if there is
[ Solution ] Noise reduction solution of Yoshikawa sandblasting machine [2015-04-10 14:56:07]
Sand blasting machine is generally a machine that uses compressed air as the power to form a high-speed spray beam to spray the spray material on the surface of the workpiece to be processed at high speed, so that the mechanical properties of the outer surface of the workpiece surface change. The noise of sand blasting machine generally comes from 3 aspects:
  • Total 1 Page 8 Records
  • ⎝⎛森林舞会游戏⎞⎠ About Us Products Contact Us Request Submit After- sales Service News

    七乐彩 欢乐拼三张 欢乐拼三张 真人游戏平台注册